扭剪型电动扳手(终紧) 产品型号:SS-20E 参数: 型号 电压 较大电流 最大功率 频率 较大扭矩 转速 重量 适合螺栓 SS-20E 220V 7A 1650W 50-60HZ 540N.m 16min 4.5Kg M16/M20 产品型号:SM-22E 型号 电压 较大电流 最大功率 频率 较大扭矩 转速 重量 适合螺栓 SM-22E 220V 7A 1650W 50-60HZ 911N.m 14min 4.8Kg M16/M20/M22 参数: 产品型号:SL-24E 参数: 型号 电压 较大电流 最大功率 频率 较大扭矩 转速 重量 适合螺栓 SL-24E 220V 7A 1650W 50-60HZ 1200N.m 12min 5.5Kg M16/M20/M22/M24 产品型号:SH-27E 参数: 型号 电压 较大电流 最大功率 频率 较大扭矩 转速 重量 适合螺栓 SH-27E 220V 7A 1650W 50-60HZ 1700N.m 10.5min 6.0Kg M16/M20/M22/M24/M27 产品型号:SV-30E 参数: 型号 电压 较大电流 最大功率 频率 较大扭矩 转速 重量 适合螺栓 SV-30E 220V 7A 1650W 50-60HZ 2500N.m 4.5min 7.0Kg M27/M30 扭剪型电动扳手是用来紧固扭剪型高强度螺栓的,又称为梅花头螺栓。这种螺栓设计为固有的预拉力,以拧断螺栓的梅花头作为紧固螺栓,以达到预紧力的标准。 扭剪型高强度螺栓的紧固必须分两次进行:**次为初拧,初拧紧固到螺栓标准轴力(即设计预拉力)的50%~80%,初紧的扭矩值不得少于终拧扭矩值的30%;*二次紧固为终拧,终拧时,扭剪型高强度螺栓应将梅花头拧掉,为使螺栓群中所有螺栓均匀受力,初拧、终拧都应按一定顺序进行。 扭剪型电动扳手广泛用于电力建设、冶金建设、化工建设、桥梁建设、高层建筑等钢结构的安装紧固。 Electric shear wrench was used to fastened the TC bolts .Tension control bolts ,also called "twist-off"bolts ,these bolts have a splined extension that will disconnect when the bolts' tension reaches a predetermined value. So twist-off the splined extension means that it have reached to the bolts' pre-tension design. High-strength bolts fastening is divided into two parts . For the first time early mistake, standard screw fastening bolts early access to axial force (pre-tension design)60%-80% of the initial value of torque twist the screw end torque value of not less than 30% .Second screw fastening to the end ,when the final twist torsion and shear type cards with high-strength bolts should first shake off Plum .To enable all groups bolts by bolts uniform ,the early mistake seekers have eventually make certain order . Electric shear wrench is perfectly used in the Power Plant Construction ,Metallurgical Construction,Chemcal industry construction,bridge construction ,Steel frame buildings. Which is professional for metal fastening work .